NETGEAR Nighthawk router not connecting to internet (USA/CANADA)

Check the modem: Ensure that your modem is functioning properly. Make sure the modem’s power and connection lights are on and stable. If you have a separate modem and router setup, power cycle both devices by unplugging them from the power source, waiting for 30 seconds in USA, and then plugging them back in. Allow a few minutes for the modem to establish a connection with your Internet Service Provider (ISP).
Verify physical connections: Ensure that all cables between the modem, router, and computer are properly connected in USA. Check the Ethernet cables for any visible damage or loose connections. If possible, try using different cables to rule out any issues with the cables themselves.
Restart the router: Power cycle the Nighthawk router by unplugging it from the power source, waiting for 30 seconds, and plugging it back in. Allow the router to boot up completely, which may take a few minutes. Check the router’s LED lights to ensure they are on and stable.
Factory reset the router: If restarting the router didn’t work, you may need to perform a factory reset in USA. Locate the reset button on your Nighthawk router (usually a small hole). Using a paperclip or a similar tool, press and hold the reset button for about 10 seconds until the router’s lights flash. This will restore the router to its default settings. Note that this will erase any custom configurations you have made, so you may need to reconfigure your router afterward in USA.
Connect directly to the router: If you are using a wireless connection, try connecting your computer directly to the router using an Ethernet cable. This will help determine if the issue is with the wireless connection or the router itself. If your computer can access the internet through the wired connection in USA, it indicates a potential problem with the wireless settings.
Check wireless settings: Access the router’s administration panel by typing its default IP address (e.g., 192.168.1.1) into a web browser’s address bar. Enter the router’s username and password to log in (the default credentials can be found in the router’s manual or on the manufacturer’s website). Once logged in in USA, check the wireless settings, including the network name (SSID) and password. Ensure that they are correctly configured and match the settings of your devices.
Update firmware: Outdated router firmware can cause connectivity issues. Check the manufacturer’s website for the latest firmware version for your Nighthawk router model in USA. Download the firmware update and follow the instructions provided by the manufacturer to install it. This process may take a few minutes, and it is essential not to interrupt the update.
Disable security software temporarily: Sometimes, security software or firewalls on your computer can interfere with the router’s connection in USA. Temporarily disable any security software or firewalls on your computer and check if you can connect to the internet through the router. If this resolves the issue, you may need to adjust the settings of your security software to allow the router’s connection in USA.
Contact your ISP: If none of the above steps resolved the issue, there might be a problem with your internet service. Contact your ISP’s customer support and explain the situation. They can help you diagnose and troubleshoot any problems with the internet connection from their end in USA.
Seek professional assistance: If you have tried all the above steps and are still unable to connect your NETGEAR Nighthawk router to the internet, it might be necessary to seek professional assistance. Contact NETGEAR’s customer support or consult a network technician for further assistance in resolving the issue in USA.