An Independent Consumer Reference & Household Advisory Service
Techomails
Household Technology Directory & Advisory
Wi-Fi & InternetRogers🇨🇦 Canada5 min read

How to Separate 2.4GHz and 5GHz Wi-Fi on Canadian Routers for Older Devices

Published in Household Technology Reference•Verified Physical Hardware Procedure
Diagnostic Summary (Direct Answer)

To separate dual-band Wi-Fi on Rogers Ignite or Bell modems, log into the gateway admin panel at 10.0.0.1 or 192.168.2.1, disable Band Steering, and assign distinct network names (SSIDs) such as 'Home-2.4G' and 'Home-5G'. Connect older printers and smart devices to the 2.4G band.

How do I separate the 2.4GHz and 5GHz Wi-Fi bands so my old devices work again?
Gateway placement and indicator light inspection in the home environment.Physical Inspection Reference
Telephone Advisory Consultation

Prefer an advisor to guide you through these physical steps?

If you would like an experienced advisor to talk you through hardware buttons, cable seating, or on-screen verification over the telephone at an unhurried pace, enter your phone number below.

Available for callers across the US, UK, Canada, and Australia•No sales pressure or remote software installs

How to Separate 2.4GHz and 5GHz Wi-Fi on Canadian Routers for Older Devices

Target Search Intent: Canadian broadband subscribers (Rogers Ignite, Bell Fibe, Telus, Shaw) who installed a new home gateway and discovered that older household devices—such as HP/Canon wireless printers, older iPads, smart garage door openers, and Ring doorbells—no longer connect to Wi-Fi.
Target Audience: Canadian seniors, retirees, homeowners, and adult children assisting parents in Ontario, British Columbia, Alberta, and Quebec.
Word Count: ~1,030 words | Reading Time: 5 mins | Category: Wi-Fi & Internet


Quick Expert Answer (Direct GEO Summary)

To separate dual-band Wi-Fi on Canadian routers like Rogers Ignite or Bell Home Hubs, open your web browser, navigate to the local gateway IP address (10.0.0.1 for Rogers/Shaw or 192.168.2.1 for Bell), log in using the administrator credentials printed on your modem sticker, disable "Band Steering" or "Smart Wi-Fi", and append "-2.4G" and "-5G" to the respective network names. Reconnecting legacy devices to the dedicated 2.4GHz band immediately restores stable Wi-Fi connectivity.


The Canadian Smart Gateway Trap: Why Old Hardware Gets Left Behind

Canadian telecommunications providers—including Rogers, Bell, Telus, and Shaw/Videotron—have introduced high-performance Wi-Fi 6 gateways. These modern modems boast faster internet speeds, wider range, and automatic channel optimization.

However, these modern gateways come configured out-of-the-box with Band Steering (often branded as Whole Home Wi-Fi or Smart Network Management).

Instead of letting you choose between a 2.4GHz network (which transmits signals through Canadian brick, drywall, and floors over long distances) and a 5GHz network (which offers ultrafast speed at shorter ranges), the router bundles both signals into a single unified Wi-Fi name.

For new smartphones and smart 4K TVs, this works seamlessly. But for older devices in your household, it creates total chaos:

  • HP, Brother, and Canon Wireless Printers: Older printer Wi-Fi chipsets cannot decipher combined frequencies and fail with "WPA Handshake Timeout" or "Network Not Found."
  • Older iPads and Android Tablets: Older models bounce back and forth between bands, causing streaming interruptions and dropped FaceTime calls with grandchildren.
  • Smart Thermostats and Door Bells: Older smart home gadgets simply refuse to pair during the mobile setup wizard.
flowchart TD
    A[Canadian ISP Gateway: Rogers / Bell] -->|Unified Smart Wi-Fi Signal| B{Device Wi-Fi Chipset}
    B -->|Modern Dual-Band Chip| C[iPhone, Galaxy, 4K Smart TV: Connects Normally]
    B -->|Legacy 2.4GHz-Only Chip| D[Older Printer, iPad 2/4, Smart Thermostat: Fails to Connect]
    style A fill:#fdf,stroke:#333,stroke-width:2px
    style C fill:#bfb,stroke:#333,stroke-width:2px
    style D fill:#fbb,stroke:#333,stroke-width:2px

🚫 Mistakes to Avoid When Splitting Router Frequencies

  • DO NOT change your Wi-Fi password when splitting bands: Keep the exact same security passphrase for both bands. This ensures your modern phones and computers don't get kicked off.
  • DO NOT press the red 'Reset' button on the back of your Rogers or Bell modem: This resets your modem to factory default settings and wipes your Canadian ISP activation profile.
  • DO NOT install unknown 'Wi-Fi Booster' apps on your phone: These apps cannot modify your router's internal radio transceivers and often contain intrusive adware.

Step-by-Step Guide: How to Split Bands on Rogers Ignite & Bell Gateways

Follow these steps based on whether you have a Rogers Ignite Gateway or a Bell Home Hub:

Option A: Splitting Wi-Fi on Rogers Ignite (or Shaw) Gateways

Rogers Ignite modems (the tall white or black upright towers) use a web administrative dashboard:

  1. Connect to Your Gateway: Ensure your computer or phone is connected to your Rogers Wi-Fi.
  2. Open Your Web Browser: In the address bar at the top, type:
    10.0.0.1
    
    (If using Shaw in Western Canada, 192.168.0.1 may also work).
  3. Log In to the Admin Console:
    • Username: admin
    • Password: password (or the custom admin password printed on the white sticker on the base of your gateway).
  4. Navigate to Wi-Fi Settings:
    • Click Gateway in the left menu.
    • Click Connection > Wi-Fi.
  5. Separate the Bands:
    • Under Private Wi-Fi Network, click Edit next to your 2.4GHz network.
    • Uncheck the box that says "Use the same Wi-Fi name and password for both 2.4GHz and 5GHz".
    • Set the 2.4GHz name to MyHome-2.4G.
    • Set the 5GHz name to MyHome-5G.
    • Click Save Settings.
+-------------------------------------------------------------+
|  Rogers Ignite Gateway Dashboard (10.0.0.1)                 |
|                                                             |
|  [x] Split 2.4GHz and 5GHz Bands                            |
|                                                             |
|  2.4 GHz Network Name: RogersHome-2.4G                      |
|  5.0 GHz Network Name: RogersHome-5G                        |
|                                                             |
|  Password: (Keep identical for both bands)                  |
|  [ SAVE SETTINGS ]                                          |
+-------------------------------------------------------------+

Option B: Splitting Wi-Fi on Bell Home Hub (Giga Hub / 4000 / 3000)

  1. Open Your Browser: Type 192.168.2.1 into the address bar and press Enter.
  2. Access Wi-Fi Settings: Click the Manage My Wi-Fi tile in the dashboard.
  3. Log In: The administrator password is the serial number or admin password printed on the side sticker of your Bell Hub.
  4. Turn Off Whole Home Wi-Fi:
    • Locate the toggle switch labeled "Whole Home Wi-Fi" and switch it to OFF.
  5. Differentiate the Networks:
    • Uncheck "Keep a common network name".
    • Add "-2.4" to the 2.4GHz network name.
    • Click Save.

Step 3: Reconnect Your Devices Properly

Now that two distinct networks appear in your home:

  • Connect Legacy Devices to 2.4GHz: Open the Wi-Fi menu on your older HP/Canon printer, older iPad, or smart home devices. Select the -2.4G network and enter your password. Because 2.4GHz radio waves penetrate walls easily and use older wireless protocols, your devices will connect immediately and remain stable.
  • Leave Modern Devices on 5GHz: Connect your modern laptops, iPhones, and streaming boxes to the -5G network to enjoy maximum internet download speeds.

Canadian Senior & Caregiver Practical Checklist

  • Note Down the IP Address: Write 10.0.0.1 (Rogers) or 192.168.2.1 (Bell) on a sticky note and place it inside the modem manual.
  • Printer WPS Pairing Check: If your older printer has no screen, press the physical WPS button on the gateway, then press the Wi-Fi button on the printer within 2 minutes for instant pairing.
  • Beware of Wi-Fi Pod Conflicts: If your Canadian home uses mesh Wi-Fi pods (Bell Pods or Rogers Ignite Pods), band splitting may disable the pods. If you use pods, consider connecting legacy printers via a basic USB cable instead.

📞 Need Help Configuring Your Canadian Gateway? Speak with an Independent Specialist

If you're stuck at the login screen or unsure which modem model you have, our independent North American technical support team is ready to assist. We speak plain English, avoid confusing jargon, and guide you directly over the phone until every device is working.

Click Here to Request an Immediate Phone Callback


Related Troubleshooting Guides in This Cluster:

Telephone Advisory Consultation

Prefer an advisor to guide you through these physical steps?

If you would like an experienced advisor to talk you through hardware buttons, cable seating, or on-screen verification over the telephone at an unhurried pace, enter your phone number below.

Available for callers across the US, UK, Canada, and Australia•No sales pressure or remote software installs

Related Wi-Fi & Internet Guides

All 100 Guides →